-
Cryogenic Ball Valve
Size: 2”-12”. Class: 150LB-2500LB. 3PCS Forged BodyAdd to Inquiry -
Cast Steel Floating Ball Valve
Floating valve is meant with ball isn't fixed. Under flow pressure, the ball floats to downstream slightly and get in touch with with body seat surface to make a decent seal.Add to Inquiry -
Pneumatic Cryogenic Ball Valve
Designed for reliable automated isolation of ultra-low-temperature media, our Pneumatic Cryogenic Ball Valves are engineered in accordance with BS 6364 to deliver dependable shut-off performance atAdd to Inquiry -
Pneumatic Carbon Steel Ball Valve
The Pneumatic Carbon Steel Ball Valve is engineered for industrial pipelines requiring rapid, repeatable, and automated shut-off performance. By pairing a high-strength carbon steel valve body with aAdd to Inquiry -
SS Floating Ball Valve
Valves are manufactured in 2 pieces bolted body, ball valves could be offfered as full or reduced bore, design for maximum rigidity against the pipeline thrust, valves can made from forged componentsAdd to Inquiry -
Cast Steel Floating Ball Valve
Cast steel floating ball valves refer to floating ball valves that have cast steel valve body. These valves are mainly designed for low pressure services with a flexible temperature range. ItAdd to Inquiry -
1 Piece Ball Valve
A 1-piece ball valve is a shut-off valve that uses a rotatable ball to control the flow of fluid. The ball is seated in a bore of the body and has a hole in the center that aligns with the ports inAdd to Inquiry -
1 Piece Ball Valve
Size: 1/2”-8”. Class: 600LB-1500LB. Mode of operation: Lever, Gear box, Electric, Pneumatic, hydraulic device, Pneumatic-hydraulic device;Add to Inquiry -
Forged Floating Ball Valve
Size: 1/2”~10”. Class: 150LB 〜2500LB. 2PCS Forged BodyAdd to Inquiry -
Flanged Floating Ball Valve
The series FFB Tow-Piece,. Floating ball valve 1/2-6. ANSI Class 150-600,1/2-2Add to Inquiry -
Pneumatic Segment Ball Valve
Pressure Rating: Class 150,PN16,PN10. Size range: 1/2”-10”(DN15-DN250). Body Style: WaferAdd to Inquiry -
CS Ball Valve
Size: 1/2”-8”. Class: 150LB-2500LB. Floating Ball, RB&FBAdd to Inquiry
The KLEP Straight Through High-Pressure Diaphragm valve consists of the valve body and a diaphragm. The valve closes mechanically via a compressor, which is located above the...
Straight Through Diaphragm Valve are available as BS 5156 short and DIN 3202 F1 long face to face in a wide range of body and lining materials to meet the customers requirements. KB...
Straight Through Diaphragm Valve (Tru-Flow) The Tru-Flow Straight Thru Diaphragm Valve is designed for leak-proof control of abrasive and corrosive liquids, suspensions, slurries, and pulps. Tru-Flow...
Straight Through Diaphragm Valve (Maxi-Flow) Maxi-Flow Advantages. Ductile Iron construction, as opposed to cast iron, reduces damage from wear and tear and improves... Valve Sizes....
Ball Valves – Cryogenic Application; 3 Piece Three Way Reduced and Full Bore; 3 Piece 2 Way Reduced and Full Bore; Two Piece 3 Way Reduced and Full Bore; Buried Service; Trunnion...
Straight Through Diaphragm Valves is used to control non corrosive or general corrosive medium. The inner cavity surface of the valve body is unlined or covered with various kinds of...












