Knowledge

Home/Knowledge/Details

What are the reasons why the three-way ball valve is not closed tightly?

Stainless steel three-way ball valves may have various failures during use. Among them, the stainless steel three-way ball valve is not closed tightly is an occasional situation, so what are the reasons for the three-way ball valve not to be closed tightly?

1. The stem thread is rusty

For the electric three-way ball valve valve that is usually in the open state, when it is accidentally closed, because the thread of the valve stem has rusted, it may not be closed tightly.

2. The sealing surface of the stainless steel three-way ball valve is damaged

If the switch is still not closed tightly after trying many times, the sealing surface has been damaged and should be reported for repair; or if the sealing surface is damaged by corrosion or particle scratches in the medium, it should also be reported for repair.

3. There are impurities stuck to the sealing surface of the electric valve

Sometimes the electric valve does not close tightly suddenly. It may be that there is an impurity stuck between the sealing surface of the electric valve. At this time, do not apply force to close it. The electric valve should be opened slightly, and then try to close again. Try repeatedly, and keep the medium. The quality is clean.

4. The valve stem is not well connected to the valve disc

Lubricate the valve stem and stem nut of the stainless steel three-way ball valve frequently to ensure that the electric valve can be switched flexibly, and a formal maintenance plan is required.