-
SS Floating Ball Valve
The series FFB Tow-Piece,. Floating ball valve 1/2-6. ANSI Class 150-600,Add to Inquiry -
Pneumatic Explosion Proof Ball Valve
Unlike electrically actuated valves installed in hazardous zones, this system uses compressed air as the primary driving force, eliminating ignition risks at the valve location while maintainingAdd to Inquiry -
Pneumatic Flanged Ball Valve
Industrial automation requires valves that deliver consistent performance under demanding operating conditions. As an experienced industrial valve manufacturer, we design and manufacture pneumaticAdd to Inquiry -
Pneumatic Trunnion Mounted Ball Valve
The Pneumatic Trunnion Mounted Ball Valve is designed for high-pressure, large-diameter, and continuous-duty pipeline systems where stable sealing performance, predictable torque behavior, andAdd to Inquiry -
Cryogenic Extension Ball Valve
The cryogenic extension ball valves are always for cryogenic floating ball valves and cryogenic trunnion ball valves.If the ball valves the temperature higher than -50℃, the long neck structure isAdd to Inquiry -
3 Piece Ball Valve
The body of a 3-piece ball valve is made of cast iron, stainless steel, or other materials and is designed to withstand high pressure and temperature. The body has two ports, one for the inlet andAdd to Inquiry -
1 Piece Ball Valve
Size: 1/2”-8”. Class: 600LB-1500LB. Mode of operation: Lever, Gear box, Electric, Pneumatic, hydraulic device, Pneumatic-hydraulic device;Add to Inquiry -
2 Piece Stainless Ball Valve
Size: 1/2”-8”. Class: 150LB-2500LB. Floating Ball, RB&FBAdd to Inquiry -
Forged Floating Ball Valve
Size: 1/2”~10”. Class: 150LB 〜2500LB. 2PCS Forged BodyAdd to Inquiry -
Metal Seated Ball Valve
Size: 2”~24”. Class: 150LB 〜2500LB. 3PCS Forged BodyAdd to Inquiry -
Threaded Ball Valve with Top Mounted
Size: 1/4-4”. Pressure: 1000 WOG. Ends: Threaded, Socket Weld, Butt Weld, FlangedAdd to Inquiry -
Cryogenic Ball Valve
Size: 2”-12”. Class: 150LB-2500LB. 3PCS Forged BodyAdd to Inquiry
Pressure Relief Devices. Pressure relief devices are used to provide a means of venting excess pressure which could rupture a boiler or pressure vessel. A pressure relief device is the last line of...
IV. Max. Temperature: 250° F. For use with low-pressure steam-heating boilers requiring pressure relief at 15 psi, these valves meet ASME Code Section IV. All spring fully open at the set pressure...
May 24, 2020 · Marine Boiler [Part-1], Safety Valve. Safety valve are fitted to protect the boiler from over pressure. Type of boiler safety valve, marine auxiliary boiler and exhaust gas boiler...
– The safety valve is the most important valve on the boiler. Safety valves prevent dangerous over pressurization of the boiler. Safety valves are installed in case there is failure of pressure...
Function of a Boiler Safety Valve. It maintains the Boiler pressure within the Working pressure. Safety Valve does not allow the steam pressure to increase above safe limit. If the steam pressure in...
The valve removed from the boiler can be sent out for repair and calibration and act as a spare safety valve until it’s time to replace the one on the boiler. Maintaining safety valves should always...













