News

Home/News/Details

Precautions For Ball Valve Operation

1. The stainless steel valve should avoid contact with other metals, and be careful not to allow foreign objects such as garbage to enter, and store it in a well-ventilated environment.

2. In order to protect the gasket in the ball valve, the ball valve should be in a fully open state, and the gate valve, stop valve, and check valve should be stored in a fully closed state.

3. Before piping construction, confirm the state of the interface, whether there is oil stains, etc., if any, remove the attached foreign matter.

4. There is a specified flow direction on the valve body. During piping construction, the flow direction shown on the valve body should be confirmed. The flow direction should be the same as the arrow on the valve body during installation.

5. When connecting the pipe to the valve, fix the valve end on the side of the pipe with a wrench first, and then tighten the steel pipe with a pipe wrench. If the thread is over-tightened, the end of the steel pipe will damage the inside of the ball valve.

6. When tightening the bolts, do not only tighten one side, but tighten the bolts on the corresponding diagonal line.

7. For valves that use sealing rings, due to the characteristics of the sealing rings, the pressure of the sealing parts will drop during storage, resulting in leakage. The loose screws must be tightened before use. Loose screws should also be checked regularly during normal use.